Jet Agitation Kit for Sprayer Tanks

Description

The Jet Agitation Kit (RITJAK) comes with all the required tools needed to introduce jet agitation to your existing spraying unit. This kit will keep the material inside the tank mixed with the jet agitator, capable of keeping non-soluble sprayer chemicals and fertilizers in suspension.
Make sure all fittings and clamps are secured tightly. It is considered dangerous to use agitation on the return line from the regulator on a diaphragm pump, so it is recommended to use one of the pressure lines instead.
The Jet Agitation Kit includes:
1 x Hose (5' length x 3/8" diameter)
2 x Clamps
1 x Jet Agitator
1 x Bulkhead Assembly
1 x Hose Barb (3/8")
1 x Hex Nipple
How to Install: The hose needs to be installed to the spraying unit after the regulator by adding the 3/8" hose barb where the pressure line leads to the spray gun, boom, or hose reel. For best agitation, a hole should be created for the bulkhead assembly at the tank's base. You can use a hole saw to create the hole. Now the material inside the tank will stay mixed and help keep the dispersion of suspended chemicals even.